Re: Popup message box in VB6 with Intel® Iris™ and HD Graphics random not...
Hi,But if you can replicate the problem why do you need my BIOS and VBIOS info.I have two computer that you can get my BIOS + VBIOS (both with this problem and have Iris Intel HD graphics) Computer...
View ArticleWhy does Windows 8.1 metro games lag(some time) on intel hd 4400 graphics?
I've recently bought a PC with following configurations:Asus H81M-E :Motherboards - H81M-E - ASUSIntel 4th generation Core i3 4150 processor 3.50 Ghz :ARK | Intel® Core™ i3-4150 Processor (3M Cache,...
View ArticleRe: 7260 AC+BT problem with both Wifi and Bluetooth
Well, apparently it works. I will do a proper test later today, but for the moment it seems like it works. The router is up to date. The laptop BIOS is 1.14 and so it is the update. There was no need...
View ArticleRe: Intel HD won't show 2560*1600
I made sure it was tight and it works fine with these new cards and before, so don't think it has anything to do with the cables.
View ArticleRe: How to read binary data via Serial1?
That's exactly what I want to do.I completely received the sensor data. Thank you!
View ArticleRe: i7 4790K temperatures
Hi all, Since yesterday I have a new CPU (RMA). I've done some (short) tests with Prime95 small FFT's and I can confirm that based on these tests, the max temperature seems to be 10°C - 15°C lower....
View ArticleRe: DX79SI USB 3.0 Boot Bug
When do you think this bug will be fixed? Is this true that this board abandoned? Because there is no Driver Updates no BIOS updates, and even no all drivers for Windows 8.1, there is only 4 drivers...
View ArticleRe: Kernel build error?
Hi, according to manual of BSP, there is no mention about error message of postBuild.shBut why this error is happening?
View ArticleClik here to view.
Re: DN2820FYK no signal randomly
Thank you for your reply Joe.I have tried several different brands of HDMI cable, all give the same 'No Signal' message on my TV. Interestingly if i completely unplug the HDMI, the TV says 'No...
View ArticleRe: SATA RAID Controller update
Bitiuscal, the RST option ROM cannot be updated since that is the version that comes on your board.Regarding the 3TB hard drives, the board you are using comes with a 4th series chipset, and this...
View ArticleRe: Edison thermal_zones - clarification/documentation
I used the following script which shows the devices; for i in /sys/class/thermal/*/tempdoecho $icat $iecho "---------------"done My result is:/sys/class/thermal/thermal_zone0/tempcat: read error:...
View ArticleRe: mraa:Aio last version wrong reads of input voltage
Hi CMata_Intel, Thanks, All returns to work! Regards Thror
View ArticleRe: How to automatically run program on Intel Galileo startup?
Hi firmwarengineer, Have you already seen this post https://communities.intel.com/thread/48558 ? It is on how to run scripts / programs at startup and they use cronie which you can download from AlexT...
View ArticleRe: Arduino 1.5.3 IDE Galileo on Mac OSX 10.7.5
+1 for dodgy USB cable issues. Too funny. Swapped out my cheap USB cable then it all worked fine. Thanks Stan.
View ArticleRe: Edison thermal_zones - clarification/documentation
Hi deium,I tested it on my board and got similar results to those posted by Helmut64 I got acat: read error: Invalid argumenton thermal zones 0 and 2, and values very similar in thermal zones 1,3 and...
View ArticleRe: Screen Resolution - Graphic card update needed?
The driver update will not make changes on your system in order to get 4K resolution. It will fix some graphics issues. You can check the following URL for the complete information...
View ArticleDedison, Hooking Edison to Anything voids warranty
So my edison ( that was formerly functioning properly after a lot of effort to match the working firmware with working mraa,etc ) started to overheat. And then it couldn't be connected to. And then...
View ArticleRe: DH87MC boot problem with new monitor
You may want to try installing the other BIOS in order to check if that solves this behavior.
View ArticleClik here to view.
Re: Using Eclipse to build and debug projects for Edison.
Hi Kurt; 1. That is the recommended tutorial 2. Setting up Eclipse. Step 6 enters how to choose between them and states: "The “galileo” entry is just a nomenclature and will not affect the environment...
View ArticleRe: Build custom package in a new Yocto layer
To start with try `bitbake nano` and see if the ipk builds in tmp/deploy. I'm not entirely sure on your problem but I'd start with renaming your nano.2.26.bb to follow the nomenclature nano_2.26.bb as...
View Article