Re: Change the "Hard Drive Write Cache Enabled" setting on DP35SP
Thanks Kevin I'm not sure I understand how breaking the mirror changes the "Hard Drive Write Cache Enabled" setting. Are you saying it's not a user adjustable setting? What determines if the setting...
View ArticleRe: Galileo Debian v1.1 image
But Alec, if I read your lsmod output correctly, you do indeed have the cy8c9540a module compiled and available. I am still suspecting that it's operating at 400kHz, which is known to not work well...
View ArticleRe: New PROSet software/driver for 7260 AC disabled/crippled wide channel in...
I have same settings as the link you provided. On Adapter I have: 802.11n channel width for band 2.4: Auto802.11n channel width for band 5.2: AutoHT Mode: VHT <--- have this which is same as...
View ArticleHow to create blog post?
On the 'create' menu in these communities there is an option for 'Blog post'I tried to create a blog post and typed it all up, but it would not let me post is because the only option is 'In a Place',...
View ArticleRe: Missing +HS(High Speed) functionality in 7260 AC
Hi Sylvia_intel, I have Generic Intel drivers and not OEM. I am missing the HS enable option in Bluetooth propertiesthat is shown in the image, thank you for showing me this helps me a lot.
View ArticleIntel NUC DN2820FYKH
HelloI bought the Intel NUC DN2820FYKH kit. I use Memory Crucial 4GB CT51264BF160BJ. When I turn on the computer, there are a few hits on the hard drive, but there is no output to the screen. The Kit...
View Article4K/UHD resolution on Haswell: HBR2 via DP supported?
Hi, we are testing Haswell systems with new 28" UHD-resolution Display Samsung U28D590D. This monitor has DP1.2 and HDMI 1.4a inputs. As expected, 3840x2160@30Hz works via HDMI on Haswell platforms....
View ArticleRe: **BIOS release - DZ87KLT-75K HDMI Audio Issue Resolved **
Just upgraded to this BIOS now - and bricked my board. No beeps, no display output no nothing after powering on. Lights are on but no-one is home... The Post Code on the board is 00 92. About to...
View ArticleRe: Breaking RAID1 - Need specific instructions
Thanks, Simple when you know it, and I suppose it will work You said above "Do not uninstall the SW", but is the RAID software compatible with Win8.1 if/when I go from Vista to Win8?Thanks in...
View ArticleRe: Beta Intel® Iris™ and HD Graphics Driver for Windows* 7/8/8.1 32-bit and...
I think you fixed - accidentally (?) - 2D HW acceleration problems of IE11 that I had with a lot of sites. There was a delay to scroll down a fully loaded page, immediately after load and now that...
View ArticleRe: Memory Issue for DZ87KLT-75K
I used the windows express method to install the BIOS update, and was told it took place successfully. It did not fix the problem of not reading the RPM of some Corsair fans. Before I could test the...
View Articlei3 internal parity errors
Hi, I'm using a MSI board H81-P33 with a new i3-4330 running at default settings. Now I‘ve found “internal parity errors” logged by Windows WHEA-Logger (event ID 19). I’m getting one warning in about...
View ArticleRe: Memory Issue for DZ87KLT-75K
Hi TomTech Sorry to hear that but just as a heads up iv always used the BIO file to update. This is how i did the update:I'm Running Windows 8.1 and i had set up secure boot. 1. Always reset the BIOS...
View ArticleRe: DH87RL bricked - need a 1:1 BIOS flash image (have a programmer)
hi @kevin_intel, i have pretty much the same request for another board, see https://communities.intel.com/message/233487#233487 .if the info i posted is not enough, which markings specifically are needed?
View ArticleRe: Memory Issue for DZ87KLT-75K
stephenb.b.r, When you say " i plugged it in the rare USB Port on the motherboard not from the chassis ports", to which port are you referring? Doc
View ArticleRe: Memory Issue for DZ87KLT-75K
I mean the USB ports on the motherboard, to be specific i used one of the USB 2.0 yellow port. the chassis ones are the front ones i didn't use those but they work too, i have used them several times...
View Article