Re: Connecting 802.11ac laptop to wireless network causes other devices to...
Try disabling U-APSD support on 7260's settings and see if it still makes the router drop WiFi.
View ArticleRe: Intel NUC D34010WYK cannot get to BIOS.
Hi Sylvia,I have tried all the bioses you mentioned, and still the same issue, the keyboard is not being initialised before being presented with the F2 F7 F10 prompt. It seems to me, that there is a...
View ArticleQuestion about temperatures: D54250WYKH1
I wanted to see if anyone knew whether the Intel i5 NUC's are in a representative idle state while in the BIOS? Based on my experiments, I am thinking that when it is in the BIOS, any power saving...
View ArticleRe: Intel NUC DN2820FYKH & USB Flash Drives
Thanks for your response Allan. It is at the current BIOS - will await a further version
View ArticleClik here to view.
Easy temperature measurement with the LM35
One of the easiest ways to implement a temperature sensor on the Galileo (I'm using the Gen 1 board) is to use an LM35DZ. This inexpensive chip delivers an analog voltage proportional to the...
View Articleintel core i7 4930k compatible with intel DX79TO motherboard?
In Intel`s webpage i read that the i7 4930k isn`t compatible with Intel DX79TO motherboard, both boxes says that they are LGA2011 compatible , in a lot of computer webpages i found that they can be...
View Articleintel core i7 4930k compatible with intel DX79TO motherboard?
In Intel`s webpage i read that the i7 4930k isn`t compatible with Intel DX79TO motherboard, both boxes says that they are LGA2011 compatible , in a lot of computer webpages i found that they can be...
View ArticleClik here to view.
Re: please, help me about Opencv Error in yocto build.
Hello, Bill. I find Opencv 2.4.9 md5 code at Sourceforge.net I want to apply md5 code for opencv_2.4.3.bb file..
View ArticleI7 2600k high temperatures
Hi, after I switched to a new motherboard the Asus p8z77-v and overclocking my CPU began running very hot. My cpu used to run at around 25c but it wasn't overclocked. After putting everything back...
View ArticleRe: Intel HD Graphics 3000 black screen issue?
Just tried it, and everything seems ok so far. I actually just installed the older version from the folder i got off my computer manufacturer's website, and it asked me if i wanted to install it over...
View ArticleRe: DN2820FYKH DTS-HD?
Thanks for the temporary workaround gor_gor. Intel really needs to address this issue. I know the admins are just delivering the message and I'm grateful that they provided the information to us, but...
View ArticleIntel BXTS13X Liquid Cooling air flow direction
I'm new to liquid cooling and just installed an Intel BXTS13X in my corsair 540 case. What I'm wondering is should the fan be pushing air over the radiator? or pulling air across it? (i read elsewhere...
View ArticleRe: NUC DN2820FYKH won't boot from anything
I am not from Intel but I bought that NUC and had experiences which could be like yours, so I will try to help. My NUC arrived with an early BIOS, and that BIOS would not let me type from any of my...
View ArticleGalileo: Pushing kernel modules
Hi, I have built the linux for Galileo [BSP 1.0.0 package] and it's booting fine, I have customized a driver and built it as a module, I want to know how I can push it into the Galileo.USB connected to...
View ArticleRe: Galileo: Pushing kernel modules
I went through Alex's Blog on how to build the kernel an all."Reconfiguring Linux kernel and adding drivers into Galileo's Linux image" but my SSH /SCP is timing out, & I am not able to see any...
View ArticleDH67CL: BIOS 0131 allows WEI to see graphics overclock, but not BIOS 0146
I have two PCs with DH67CL and i5-2500K. One has BIOS 0131 and the other 0146. I seem to remember that 0146 was the first one to include Ivy Bridge support, but maybe I'm wrong. 0146 is no longer...
View ArticleRe: WiDi Remote not opening.
As per your suggestion, I have tried reinstallation, but to no avail, the Remote widget still does not appear. WiDi works on my PTV3000 after updating WiDi to the latest version. Should all else fails,...
View ArticleClik here to view.
Re: How can get dmidecode fetch?
Well... mhahn, As you said, the recipe runs and working but not quite correct. Header files does not locate correctly. It may concern the configuration. Tweak needs. I'll read the Yocto reference...
View ArticleRe: Galileo Debian v1.1 image
I finally got a few hours to play with my Galileo again, and I was able to connect the dots to enable a serial port via the USB connection. Just upgrade your image, and it will put a login on the...
View Article